H-O-T Drill Screws
   

Products: Teks Steel Zinc

Teks Steel Zinc    410 H Stainless Steel Teks    Security Teks

300 Series 18-8 Stainless Steel Teks    Tek 4's & Wing Teks    Tek 5's Climaseal    Teks Climaseal

Sharp Points    Aluminum Teks    Specials    Maxiseal Teks   

Scots Fasteners    18-8 Stainless Steel 300 Series    Bonded Neoprene Washers

Fat Boys    Long Boys

_________________________________________________________________________________

Skip to a Head and Drive Type

Hex Washer    Slotted Hex Washer    Phillips Flat    Square Flat

Phillips Pan    Square Pan    Torx Pan    Phillips Oval

Phillips Wafer    Torx Wafer    Phillips Modified Truss

Teks Steel Zinc Pl.  (800) 645-2212

              

 
Head & Drive Size
 (Diameter-Thread x Length)		 Drill Pt. Misc.
Hex Washer 6-20 x 3/8 #2  
  6-20 x 7/16 #2  
  6-20 x 1/2 #2  
  6-20 x 5/8 #2  
  6-20 x 3/4 #2  
  6-20 x 1 #2  
  6-20 x 1 1/4 #2  
  6-20 x 1 1/2 #2  
       
  8-18 x 3/8 #2  
  8-18 x 1/2 #2  
  8-18 x 5/8 #2  
  8-18 x 3/4 #2  
  8-18 x 1 #2  
  8-18 x 1 1/4 #2  
  8-18 x 1 1/2 #2  
  8-18 x 1 3/4 #2  
  8-18 x 2 #2  
  8-18 x 2 1/2 #2  
  8-18 x 3 #2  
       
  10-16 x 1/2 #2  
  10-16 x 5/8 #3  
  10-24 x 5/8 #3 w/serrations
  10-16 x 3/4 #3  
  10-24 x 3/4 #3  
  10-32 x 3/4 #3 w/serrations
  10-16 x 1 #3  
  10-24 x 1 #3  
  10-16 x 1 1/4 #3  
  10-16 x 1 1/2 #3  
  10-24 x 1 1/2 #3  
  10-16 x 1 3/4 #3  
  10-16 x 2 #3  
  10-16 x 2 1/2 #3  
  10-16 x 3 #3  
       
  12-14 x 1/2 #3  
  12-14 x 5/8 #3 w/serrations
  12-14 x 3/4 #3  
  12-14 x 7/8 #3  
  12-14 x 1 #3  
  12-14 x 1 1/4 #3  
  12-14 x 1 1/2 #3  
  12-14 x 1 3/4 #3  
  12-14 x 2 #3  
  12-14 x 2 1/2 #3  
  12-14 x 3 #3  
  12-14 x 4 #3 w/serrations
       
  1/4-14 x 5/8 #3 w/serrations
  1/4-14 x 3/4 #3  
  1/4-20 x 3/4 #3 w/serrations
  1/4-14 x 7/8 #1 stitch tek
  1/4-20 x 7/8 #3 w/serrations
  1/4-14 x 1 #3  
  1/4-20 x 1 #3 w/serrations
  1/4-14 x 1 1/4 #3  
  1/4-14 x 1 1/2 #3  
  1/4-14 x 1 3/4 #3  
  1/4-14 x 2 #3  
  1/4-14 x 2 1/2 #3  
  1/4-14 x 3 #3  
  1/4-14 x 3 1/2 #3  
  1/4-14 x 4 #3 w/serrations
  1/4-14 x 4 1/2 #3  
  1/4-14 x 5 #3  
  1/4-14 x 6 #3  
  1/4-14 x 8 #3  

Teks Steel Zinc Pl.

(800) 645-2212
 
Head & Drive Size
 (Diameter-Thread x Length)		 Drill Pt. Misc.
Slotted Hex Washer 8-18 x 1/2 #2 w/serrations
  8-18 x 5/8 #2 w/serrations
  8-18 x 3/4 #2 w/serrations
  8-18 x 1 #2  
  8-18 x 1 1/2 #2  
       
  10-16 x 1/2 #2 w/serrations
  10-16 x 3/4 #2  
  10-16 x 3/4 #3 w/serrations
 
 

Teks Steel Zinc Pl.  (800) 645-2212

                        

                        

 
Head & Drive Size
 (Diameter-Thread x Length)		 Drill Pt. Misc.
Phillips Flat 6-20 x 1/2 #2  
  6-20 x 5/8 #2  
  6-20 x 3/4 #2  
  6-20 x 7/8 #2  
  6-20 x 1 #2  
  6-20 x 1 1/4 #2  
  6-20 x 1 1/2 #2  
       
  8-18 x 1/2 #2  
  8-18 x 1/2 #2 under cut
  8-18 x 5/8 #2  
  8-18 x 3/4 #2  
  8-18 x 3/4 #2 under cut
  8-18 x 7/8 #2  
  8-18 x 1 #2  
  8-18 x 1 #2 #6 Head
  8-18 x 1 1/4 #2  
  8-18 x 1 1/2 #2  
  8-18 x 2 #2  
  8-18 x 2 1/2 #2  
       
  10-16 x 1/2 #2  
  10-16 x 1/2 #2 under cut
  10-16 x 5/8 #3  
  10-16 x 3/4 #3  
  10-16 x 3/4 #3 under cut
  10-16 x 1 #3  
  10-16 x 1 #3 under cut
  10-16 x 1 1/4 #3  
  10-16 x 1 1/4 #3 under cut
  10-16 x 1 1/2 #3  
  10-16 x 1 1/2 #3 uncer cut
  10-16 x 2 #3  
  10-16 x 2 1/2 #3  
  10-16 x 3 #3  
  10-16 x 3 1/2 #3  
       
  12-24 x 5/8 #3 under cut
  12-24 x 11/16 #3 under cut
  12-24 x 3/4 #3 under cut
  12-14 x 3/4 #3 under cut
  12-14 x 1 #3 under cut
  12-24 x 1 #3 under cut
  12-14 x 1 1/4 #3  
  12-14 x 1 1/2 #3  
  12-14 x 1 1/2 #3 under cut
  12-14 x 2 #3  
  12-24 x 2 #4 w/wings
  12-24 x 2 1/4 #4 w/wings
  12-14 x 2 1/2 #3  
  12-24 x 2 1/2 #4 w/wings
  12-24 x 2 3/4 #4 w/wings
  12-14 x 3 #3  
  12-14 x 4 #3  
       
  1/4-14 x 3/4 #3  
  1/4-14 x 1 #3 under cut
  1/4-14 x 1 1/4 #3  
  1/4-14 x 1 1/2 #3  
  1/4-14 x 1 1/2 #3 under cut
  1/4-14 x 2 #3  
  1/4-14 x 2 1/2 #3  
  1/4-20 x 2 3/4 #4 w/wings
  1/4-14 x 3 #3  
  1/4-20 x 3 1/4 #4 w/wings
  1/4-20 x 3 3/4 #4 w/wings
  1/4-14 x 4 #3  
  1/4-14 x 6 #3  

Teks Steel Zinc Pl.

(800) 645-2212
 
Head & Drive Size
 (Diameter-Thread x Length)		 Drill Pt. Misc.
Square Flat 6-20 x 3/4 #2  
       
  8-18 x 3/4 #2  
  8-18 x 1 #2  
  8-18 x 1 1/4 #2  
  8-18 x 1 1/2 #2  
       
  10-16 x 1 #3  
  10-16 x 1 1/2 #3  
  10-16 x 2 #3  

Teks Steel Zinc Pl.

(800) 645-2212
 
Head & Drive Size
 (Diameter-Thread x Length)		 Drill Pt. Misc.
Phillips Pan 4-24 x 3/8 #2  
       
  6-20 x 3/8 #2  
  6-32 x 3/8 #2  
  6-20 x 1/2 #2  
  6-20 x 5/8 #2  
  6-20 x 3/4 #2  
  6-20 x 1 #2  
  6-20 x 1 1/4 #2  
  6-20 x 1 1/2 #2  
       
  8-18 x 3/8 #2  
  8-18 x 3/8 #2 w/serrations
  8-18 x 1/2 #2  
  8-18 x 5/8 #2  
  8-18 x 3/4 #2  
  8-18 x 7/8 #2  
  8-18 x 1 #2  
  8-18 x 1 1/4 #2  
  8-18 x 1 1/2 #2  
  8-18 x 2 #2  
  8-18 x 2 1/2 #2  
  8-18 x 3 #2  
       
  10-16 x 1/2 #2  
  10-16 x 1/2 #2 w/serrations
  10-16 x 5/8 #3  
  10-16 x 3/4 #3  
  10-16 x 1 #3  
  10-16 x 1 1/4 #3  
  10-16 x 1 1/2 #3  
  10-16 x 2 #3  
  10-16 x 2 1/2 #3  
  10-16 x 3 #3  
       
  12-14 x 3/4 #3  
  12-14 x 1 #3  
  12-14 x 1 1/4 #3  
  12-14 x 1 1/2 #3  
  12-14 x 2 #3  
  12-14 x 2 1/2 #3  
       
  1/4-14 x 3/4 #3  
  1/4-14 x 1 #3  
  1/4-14 x 1 1/4 #3  
  1/4-14 x 1 1/2 #1  
  1/4-14 x 2 #3  
  1/4-14 x 2 1/2 #3  
  1/4-14 x 3 #3  
  1/4-14 x 4 #3  

Teks Steel Zinc Pl.

(800) 645-2212
 
Head & Drive Size
 (Diameter-Thread x Length)		 Drill Pt. Misc.
Square Pan 6-20 x 3/8 #2  
  6-20 x 1/2 #2  
  6-20 x 3/4 #2  
       
  8-18 x 1/2 #2  
  8-18 x 3/4 #2  
  8-18 x 1 #2  
  8-18 x 1 1/2 #2  
  8-18 x 2 #2  
  8-18 x 2 1/2 #2  
       
  10-16 x 1/2 #2  
  10-16 x 3/4 #3  
  10-16 x 1 #3  
  10-16 x 1 1/2 #3  
       
  12-14 x 3/4 #3  
  12-14 x 1 #3  
  12-14 x 1 1/2 #3  
  12-14 x 2 #3  
       
  1/4-14 x 3/4 #3  
  1/4-14 x 1 #3  
  1/4-14 x 1 1/2 #3  
  1/4-14 x 2 #3  

Teks Steel Zinc Pl.

(800) 645-2212
 
Head & Drive Size
 (Diameter-Thread x Length)		 Drill Pt. Misc.
Torx Pan 10-16 x 3/4 #3  

Teks Steel Zinc Pl.

(800) 645-2212
 
Head & Drive Size
 (Diameter-Thread x Length)		 Drill Pt. Misc.
Phillips Oval 6-20 x 1/2 #2  
  6-20 x 3/4 #2  
  6-20 x 1 #2  
  6-20 x 1 1/4 #2  
  6-20 x 1 1/2 #2  
       
  8-18 x 1/2 #2 under cut
  8-18 x 1/2 #2 #6 Head
  8-18 x 5/8 #2  
  8-18 x 3/4 #2  
  8-18 x 1 #2  
  8-18 x 1 1/4 #2  
  8-18 x 1 1/2 #2  
  8-18 x 1 1/2 #2 #6 Head
  8-18 x 2 #2  
       
  10-16 x 1/2 #2 under cut
  10-16 x 5/8 #3  
  10-16 x 3/4 #3  
  10-16 x 1 #3  
  10-16 x 1 1/4 #3  
  10-16 x 1 3/8 #3  
  10-16 x 1 1/2 #3  
       
  1/4-14 x 1 #3  
  1/4-14 x 1 1/2 #3  

Teks Steel Zinc Pl.

(800) 645-2212
 
Head & Drive Size
 (Diameter-Thread x Length)		 Drill Pt. Misc.
Phillips Wafer 8-18 x 1/2 #2  
  8-18 x 3/4 #2  
  8-18 x 1 #2  
  8-18 x 1 1/4 #2  
       
  10-16 x 3/4 #3  
  10-24 x 3/4 #3  
  10-16 x 1 #3  
  10-24 x 1 #3  
  10-16 x 1 1/4 #3  
  10-24 x 1 1/4 #3  
  10-24 x 1 7/16 #3 w/wings
  10-16 x 1 1/2 #3  
  10-24 x 1 1/2 #3  
  10-24 x 2 #3  

Teks Steel Zinc Pl.

(800) 645-2212
 
Head & Drive Size
 (Diameter-Thread x Length)		 Drill Pt. Misc.
Torx Wafer 10-16 x 3/4 #3  
  10-16 x 1 #3  
  10-16 x 1 1/4 #3  
  10-16 x 1 1/2 #3  
  10-16 x 2 #3  

Teks Steel Zinc Pl.

(800) 645-2212
 
Head & Drive Size
 (Diameter-Thread x Length)		 Drill Pt. Misc.
Phillips Modified Truss/Round Washer/K-Lath 8-18 x 1/2 #2  
  8-18 x 3/4 #2  
  8-18 x 1 #2  
  8-18 x 1 1/4 #2  
  8-18 x 1 5/8 #2  
  8-18 x 2 #2  
  8-18 x 2 1/2 #2  
  8-18 x 3 #2  
       
  10-16 x 3/4 #3  
  10-16 x 1 #3  
 

 

  

Request a Quote
Click Here